GPU Passthrough to VM¶
- Interrupt mapping
- UEFI BIOS
Configuring the Grub Assuming you are using an Intel CPU, either SSH directly into your Proxmox server, or utilizing the noVNC Shell terminal under "Node", open up the /etc/default/grub file. I prefer to use nano, but you can use whatever text editor you prefer.
Look for this line:
Then change it to look like this:
IMPORTANT ADDITIONAL COMMANDS
You might need to add additional commands to this line, if the passthrough ends up failing. For example, if you're using a similar CPU as I am (Xeon E3-12xx series), which has horrible IOMMU grouping capabilities, and/or you are trying to passthrough a single GPU.
These additional commands essentially tell Proxmox not to utilize the GPUs present for itself, as well as helping to split each PCI device into its own IOMMU group. This is important because, if you try to use a GPU in say, IOMMU group 1, and group 1 also has your CPU grouped together for example, then your GPU passthrough will fail.
Here are my grub command line settings:
GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on iommu=pt pcie_acs_override=downstream,multifunction nofb nomodeset video=vesafb:off,efifb:off"
For more information on what these commands do and how they help:
A. Disabling the Framebuffer: video=vesafb:off,efifb:off B. ACS Override for IOMMU groups: pcie_acs_override=downstream,multifunction
When you finished editing /etc/default/grub run this command:
You'll need to add a few VFIO modules to your Proxmox system. Again, using nano (or whatever), edit the file /etc/modules
Add the following (copy/paste) to the /etc/modules file:
vfio vfio_iommu_type1 vfio_pci vfio_virqfd
Then save and exit.
IOMMU Interrupt Remapping¶
I'm not going to get too much into this; all you really need to do is run the following commands in your Shell:
echo "options vfio_iommu_type1 allow_unsafe_interrupts=1" > /etc/modprobe.d/iommu_unsafe_interrupts.conf echo "options kvm ignore_msrs=1" > /etc/modprobe.d/kvm.conf
We don't want the Proxmox host system utilizing our GPU(s), so we need to blacklist the drivers. Run these commands in your Shell:
echo "blacklist radeon" >> /etc/modprobe.d/blacklist.conf echo "blacklist nouveau" >> /etc/modprobe.d/blacklist.conf echo "blacklist nvidia" >> /etc/modprobe.d/blacklist.conf
Adding GPU to VFIO¶
Run this command:
Your shell window should output a bunch of stuff. Look for the line(s) that show your video card. It'll look something like this:
01:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1070] (rev a1) (prog-if 00 [VGA controller])
01:00.1 Audio device: NVIDIA Corporation GP104 High Definition Audio Controller (rev a1)
Make note of the first set of numbers (e.g. 01:00.0 and 01:00.1). We'll need them for the next step.
Run the command below. Replace 01:00 with whatever number was next to your GPU when you ran the previous command:
lspci -n -s 01:00
Doing this should output your GPU card's Vendor IDs, usually one ID for the GPU and one ID for the Audio bus. It'll look a little something like this
01:00.0 0000: 10de:1b81 (rev a1) 01:00.1 0000: 10de:10f0 (rev a1)
What we want to keep, are these vendor id codes: 10de:1b81 and 10de:10f0.
Now we add the GPU's vendor id's to the VFIO (remember to replace the id's with your own!):
echo "options vfio-pci ids=10de:1b81,10de:10f0 disable_vga=1"> /etc/modprobe.d/vfio.conf
Finally, we run this command:
Now your Proxmox host should be ready to passthrough GPUs!
Configuring the VM (Windows 10)¶
Download VirtIO drivers directly to you proxmox ios files locations
cd /var/lib/vz/template wget https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/latest-virtio/virtio-win.iso
Mount the virtio-win.iso as a second cd before staring vm for the first time (you will need to install Hard Drive Drivers for windows).
Create a new vm - follow the screenshots for configuration:
Don't Start The vm after your created it. Going back to the Shell window, we need to edit /etc/pve/qemu-server/
Edit the config to look like this:
args: -cpu 'host,+kvm_pv_unhalt,+kvm_pv_eoi,hv_vendor_id=NV43FIX,kvm=off' cpu: host,hidden=1,flags=+pcid machine: q35
Add PCI Devices (Your GPU) to VM
Start the vm run the Windows Installation. When ask to select the Hard Drive you will need to install the drivers we downloaded before so the windows will detect the hard drive:
After the first boot run the installer from virtio-win disk so the windows will install all the missing drivers.
At this point you should download the GPU Drivers and install them.
For the GPU Passthrough to work you will need to connect a real screen or use a dongle to mimic a real display.
Enable Remote Desktop to control the vm remotely
At this point we will power-off the vm, set the Display to none - at this point we will lose the "console" noVNC option at proxmox.
Since the vm now has only one gpu (PCI Passthrough), all the output will be forwarded to this card.
Here is my final screenshot of the VM's Hardware configuration:
Remove Proxmox 6.0/5.1+ Subscription Notice¶
To remove “You do not have a valid subscription for this server” run the command bellow. You will need to SSH to your Proxmox machine or use the node console through the PVE web interface.
SSH to the the proxmox host, Run the following one line command